It seems that IP intercoms are becoming increasingly popular in the modern multi-apartment buildings of today, which has led to the question: Is an analog intercom still worth having? Or should you go with an IP intercom instead?
To answer this question, let’s take a closer look at both types of intercom systems, how they work, and what each has to offer. If you’re trying to decide whether or not to invest in an analog or IP intercom system, we hope that our article will provide some valuable insight into your decision-making process!
Things to Consider When Choosing Between Analog and IP Intercoms
When you are choosing between Analog and IP intercoms following things you must keep in mind. They are below as
1) Ease of installation: IP intercoms are typically easier to install than analog models, as they only require a power and internet connection.
2) Functionality: IP intercoms often offer more features and functionality than analog models, such as the ability to connect to your smartphone or tablet.
3) Price: IP intercoms can be more expensive than analog models, but this will vary depending on the features you’re looking for.
What Exactly Is An Analog Intercom System?
Analog intercom systems have been around for many years and are the most basic type of system. They use a single wire to connect the master station (usually located near the front door) to each individual apartment unit. When someone pushes the call button on the master station, it sends a signal down the wire that rings all of the phones in the connected units.
What Exactly Is An IP (Internet Protocol) Intercom System?
An IP intercom system uses an Ethernet connection to send and receive audio and video signals. This type of system is often used in commercial buildings, as it offers a number of features and benefits that analog systems do not. For example, IP intercoms can be integrated with other building systems such as security cameras and access control systems. Additionally, IP intercoms offer better audio quality than analog systems and are more scalable.
The Advantages of Having An IP Doorphone/Intercom System over An Analogue One
The main advantage of the IP intercom is the ease of installation, the flexibility of settings, and high reliability, which allows you to install IP intercoms in any residential or office building with a complex layout.
Independent subscriber handsets or IP intercom monitors are connected to the same local network, so if necessary, a specialist can perform system settings or administration remotely. If there is no possibility of laying a local network at the facility, the solution may be IP intercoms operating via a Wi-Fi network. The capabilities of IP intercoms are limited only by the perfection of the software, so they can be used both within the local system and in large complex engineering facilities, and integration into the Smart Home system is possible.
Typical features of an IP intercom:
* open and close permitted doors or gates;
* be in touch with security;
* keyless entry;
* view images from outdoor IP cameras through the monitor of the IP intercom;
* manage home automation using your phone or tablet;
* conduct online video surveillance hundreds of kilometers from home;
* calls between tenants via intercom line;
* receiving text alerts from the management company;
* call forwarding over the Internet to a tablet, PC, or smartphone, see the guest, and open the door for him, being far from home.
The potential of IP intercoms is already very wide today and gives the owners advantages that are valued higher than their cost.
Things to Look Out For When Installing A New Door Phone/Intercom System at Home
When you are installing a new Intercom system at home following things you should keep in mind
- you need to reduce the number of wires (one UTP cable is enough or use the existing Internet network).
2) need video calls to a mobile smartphone via the Internet. Note that the Internet should be associated with the radio and cell phone.
3) you need to connect a very large number of devices in
4) many calling panels or monitors.
5) image equipment is required.
6) the system will not need to be upgraded in the future.
7) the system may turn out to be a device not supported by the manufacturer.